Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Astec Underground
  • Model:
    RT460

View Manufacturers View Models Back to Listing

Additional Info

ENGINE
Model: Kubota V1505-B
Cylinders: 4
Fuel injection: Indirect
Bore/Stroke: 3.07" x 3.09" (78.0 mm x 78.5 mm)
Displacement: 91.4 in3 (1.50 L)
Horsepower - Gross: 37 (28 kW) @ 3000 rpm, Net: 33.5 (25 kW) @ 3000 rpm
Maximum Torque - Gross: 73 lb/ft (99 N•m) @ 2000 rpm, Net: 67 lb/ft (91 N•m) @ 2000 rpm

ELECTRICAL
Battery: 12 volt 525 cold-cranking amps
Alternator: 12 volt, 30 amp
Starter: 12 volt, 1.4 kW

OPERATOR ENVIRONMENT
-Left and right entry/exit and uncluttered operator’s platform permits unobstructed operator movement and comfortable positioning when operating.

-All attachment controls are located within easy reach from the operator’s seat. The seat swivels to provide operating comfort when working with rear-mounted attachments.

-A swingaway catwalk lets you move freely to and from the
operator’s compartment to the backhoe, yet allows easy service access to the engine.

-The muffler is enclosed in the engine compartment, resulting in improved visibility to the front of the RT560.

-Single key-start ignition and shutoff for fast and easy starts and stops. System gauges and indicator lights are grouped for high visibility. Gauges — engine coolant temperature, hydraulic oil temperature, voltage, fuel level, hourmeter, rpm’s. Indicator Lights — neutral indicator, engine oil pressure, alternator, air and hydraulic filter restriction.

TIRES
Standard: 26 x 12.0 - 12, 8 Ply
Optional: 29 x 12.5 - 15, 8 Ply
Wheel base: 53.2" (1,350 mm)
Tread: 50" (1,270 mm)
Overall height to top of ROPS: 88.9" (2,258 mm)
Overall width at tires: 62" (1,575 mm)
Ground clearance at axle, 26 x 12 x 12 tire: 7.3" (186 mm)

GROUND DRIVE DIMENSIONS
Hydrostatic drive: Variable displacement axial piston pump
RT460: 0 - 27.3 gpm (0 - 103 L/min)
Axle ratio RT460: 5.38:1
Differentials: Limited-slip

DIMENSIONS
Overall height prime mover (to top of ROPS): 88.9" (2.26 m)
Overall length prime mover: 84.2" (2.14 m)
Overall transport length with backhoe and trencher with 4' boom: 246.2" (6.25 m)
Overall transport length with plow and reel carrier - no reel: 182.0" (4.62 m)
Angle of approach - prime mover: 43°
Angle of departure - prime mover: 90°
Minimum ground clearance - no backfill blade: 12.0" (305 mm)
Minimum ground clearance with backfill blade: 8.3" (211 mm)
Wheelbase: 53.2" (1.35 m)
Trencher headshaft height: 27.9" (709 mm)
Angle of departure with trencher attachment: direct (planetary): 22° (33°)
Trencher boom angle down from horizontal: direct (planetary): 60° (60°)
Trencher boom angle up from horizontal: direct (planetary): 60° (55°)
Overall transport height with backhoe: D100 - 90.0" (2.29 m)
Backfill blade height: 14.3" (363 mm)
Backfill blade lift height: 15.5" (394 mm)
Backfill blade depth of cut below grade: 11.9" (302 mm)
Transport height, plow frame base tractor: 49.0" (1.24 m)
Plow swing angle: 30° from center
Angle of departure base tractor/plow attachment raised:
with mounted blade: with 24" blade - 11°
without mounted blade: 34°
Plow blade tip ground clearance base tractor: with 24" blade - 12.2" (310 mm)
Overall width base tractor: 62.0" (1.57 m)
Tread width (centerlines) base tractor: 48.0" (1.22 m)
Turning radius (outside) base tractor - 2-wheel steer: 150" (3.8 m)
Turning radius (outside) base tractor - 4-wheel steer: 95" (2.4 m)
Operating weight: 5,660 lb (2567 kg)

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x