Dichtbij

• Fabrikant:
  Vermeer
• Model:
  T555III

T555III TRENCHER

GENERAL DIMENSIONS
Approach Angle: 17°
Height: 9.8' (3 m)
Length Range: 21' – 25' (6.4 m – 7.6 m)
Weight Range (tractor plus trencher attachment): 28,000 lb - 36,000 lb (12,700.6 kg - 16,329.3 kg)
Width Range: 8.1' – 8.5' (2.5 m – 2.6 m)

ENGINE OPTION ONE
Make and Model: John Deere 6068H
Gross Horsepower: 185 hp (138 kW)
Engine RPM: 2400
Fuel Consumption @ full load: 9.3 gph (35.2 L/hr)
EPA Certification Family: Tier 3

ENGINE OPTION TWO
Make and Model: John Deere 6068H
Gross Horsepower: 185 hp (138 kW)
Engine RPM: 2400
Fuel Consumption @ full load: 9.3 gph (35.2 L/hr)
EPA Certification Family: Tier 4 Final (Stage IV)

TRACKS
Ground Pressure: 5.4 psi – 8.4 psi (37.2 kPa – 57.9 kPa)
Tilt Track with Auto Level Available: Yes, maximum angle 10°
Track Length: 8.8' (2.7 m)
Track Pad Type: Single, Triple or Rubber Grouser
Track Pad Width Range: 15" - 24" (38.1 cm - 61 cm)
Track Size: FL6
Maximum Travel Speed: 203 fpm (61.9 m/min)
Service Brakes: Hydrostatic

CONVEYOR
Belt Width: 24" (61 cm)
Maximum Conveyor Belt Speed: 823 fpm (250.9 m/min)
Conveyor Belt Style: Cleated
Conveyor Length: 7.8' or 11.7' (2.4 m or 3.6 m)
Conveyor Shift Available: Yes
Conveyor Shift Distance: 27" (68.6 cm)
Conveyor Style: Flat
Discharge Direction: Right or left
Discharge Height: 43.5" or 45.5" (110.5 cm or 115.6 cm)

CAB
Air Conditioner/Heater: Yes, with cab option only
Air Suspension Seat: No
AM/FM Stereo with weather band: Yes, with cab option only
Elevating: No
Pressurized/Filtered Air: Yes
ROPS: Standard

TRENCHER ATTACHMENT
Boom Depth Options: 4', 5', 6' or 8' (1.2 m, 1.5 m, 1.8 m or 2.4 m)
Boom Top Rollers: Yes; on 40" (101.6 cm) end idler only
Chain Speed Range: 429 fpm – 730 fpm (130.8 m/min – 222.5 m/min)
Cutting Width Range: 6" – 24" (15.2 cm – 61 cm)
End Idler Diameter: 20" or 40" (50.8 cm or 101.6 cm)

ROCKWHEEL ATTACHMENT
Weight (tractor plus attachment): 36,500 lb (13,623.3 kg)
Maximum Cutting Depth: 36" (91.4 cm)
Cutting Width: 4.8" and 6" (12.1 cm and 15.2 cm)
Cutter Tip Speed (low range): 1112 fpm (338.9 m/min)
Cutter Tip Speed (high range): 2225 fpm (678.2 m/min)

OPTIONS
Rockwheel
Loadout Conveyor
Reel Carrier
Tile Box
Remote Control