Dichtbij

• Fabrikant:
  Vermeer
• Model:
  D220x300 S3
• Uitrusting grootte:
  200,000 lbs pullback and over

GENERAL DIMENSIONS AND WEIGHTS
Min transport length: 37' (11.3 m)
Min transport width: 100" (254 cm)
Min transport height: 11.3' (3.4 m)
Weight: 74,000 lb (33,565.84 kg)

ENGINE
Make/Model: CAT C13 ACERT Tier 4 Final
Fuel type: Ultra-low sulfur diesel
Max engine rpm: 2150 rpm
Gross horsepower: 415 hp (309 kW)
Cooling method: Liquid
Aspiration: Turbocharged and after-cooled
Emissions rating: Tier 4 Final (EU Stage IV)

OPERATIONAL
Thrust/Pullback: 242,100 lb (1076.9 kN)
Max carriage speed at max engine rpm: 120 fpm (36.6 m/min)
Max spindle torque (low at max engine rpm): 30,750 ft-lb (41,691.4 Nm)
Max spindle speed at max engine rpm: 164 rpm
Max ground drive speed at max engine rpm: 1.8 mph (2.9 km/h)
Noise level at operator’s ear: 85 dB(A)
Drill rack angle: 10°-17° (17.6%-30.6%)

FLUID CAPACITIES
Fuel tank: 134 gal (507.2 L)
Hydraulic tank: 166 gal (628.4 L)

DRILLING FLUID SYSTEM
Make: Weatherford
Max flow: 345 gpm (1306 L/min)
Max pressure: 1200 psi (8.3 MPa) at 213 gpm (806.3 L/min)

OPTIONAL CRANE
Weight: 2600 lb (1179.3 kg)
Max reach: 26.3' (8 m)
Max lifting capacity:5950 lb (2698.9 kg)
Max lifting capacity at max reach: 2530 lb (1147.6 kg)
Rotation: 400°
Wireless remote:Yes

FEATURES
Breakout system: Open-top, dual clamp, 10.2" (25.9 cm) diameter opening
Drilling lights: Yes
Flow indicator: Yes
Cab: Yes
Strike alert:Yes
Remote lockout: Yes

DRILL PIPE
Thread type: NC50 DS [4.5" (11.4 cm) IF double shoulder]
Length: 20' (6.1 m)
Rod diameter: 5" (12.7 cm) at 19.5 lb/ft (29 kg/m)
Wall thickness: .362" (9.2 mm)
Joint inside diameter:3.5" (8.9 cm)
Joint outside diameter:6.63" (16.8 cm)
Weight per joint:540 lb (244.9 kg)