Deze pagina is vertaald met Google Translate
Apparatuurspecificaties Bibliotheek
Algemene modelinformatie
-
Fabrikant:American Augers
-
Model:DD-110
-
Uitrusting grootte:100,001 - 200,000 lbs pullback
Bekijk fabrikanten Bekijk modellen
Extra informatie
**2013 MODEL SPECIFICATIONS**
Machine Dimensions / Weight
-Length: 30 feet (9.29 m)
-Width: 8 feet (2.43 m)
-Transport Height: 9 feet 6 inches (2.89 m)
-Working Height: 11 feet 4 inches (3.45 m)
-Ground Clearance: 12 inches
-Transport Weight: 41024 pounds (18608 kg)
-Operating Weight: 44246 pounds (20069 kg)
Power Train
-Engine: Cummins QSB 6.7 Diesel
-Rating: 260 hp (164 kW) @ 2200 RPM
-Fuel Capacity: 67 U.S. Gallons (254 liters)
-Hydraulic Capacity 107 U.S. Gallons (405 liters)
-Battery: 2 Deka 908 DMF 12V 1450 CCA, in series to make 24V
Drilling Unit
-Travel System: Self-propelled on Track Crawler Assembly
-Maximum Flat Surface Speed: 2.25 mph (3.62 km/h)
-Drill Angle: Fixed at 15°/27% Grade
-Wrench/Clamp: Open top floating vice grip type
-Weight, Drill Unit: 44246 pounds (20069 kg) with 21 pieces of pipe
-Hold Down System: I-beam stakes manually driven (by excavator); Rear thrust stabilizers resist rearward movement of drill when thrusting
Rotary Drive
-Rotary System: (2) Pinion and gear drive. Infinitely variable.
-Maximum Rotary Torque: 14000 ft-lbs (18981 N-m)
-Maximum Rotary Speed: 150 RPM
Carriage Drive
-Carriage System Rack and pinion, (6) pinion drive with adjustable force limiter
-Maximum Thrust/Pullback: 100000 pounds (45.4 tonnes)
-Maximum Carriage Speed: 100 feet (32.3 m)/minute
Mud Pump
-Onboard Mud Pump: Triplex piston pump with non-electric liner wash
-Output: 200 U.S. Gallons (113.6 liters)/minute @ 1100 psi (75.9 Bar)
-Fluid Course: 2 inches (50 mm)
-Maximum Flow: Up to 250 U.S. Gallons (945 liters)/minute flow
Pipe Loader
-Automated Rod Loader: Uses 20 foot (6.10 m) drill stem. Total pipe capacity on drill is 360 feet (109.7 m); 9 pieces/basket; 2 baskets/machine
Drill Pipe (DD-110)
-Length (each section): 20 feet (6.10 m)
-Outside Tube Diameter:: 3-1/2 inch (89.0 mm)
-Tool Joint Outside Diameter: 4-1/8 inch (105 mm)
-Thread Type: 2-7/8 inch IF Pin x Box
-Water Course: 1-1/2 inch (38.1 mm)
-Weight: 358 pounds (162.39 kg) each
Drill Pipe (DD-110S)
-Length (each section): 15 feet (4.57 m)
-Outside Tube Diameter: 3-1/2 inch (89 mm)
-Tool Joint Outside Diameter: 4-1/8 inch (105 mm)
-Thread Type: 2-7/8 inch IF Pin x Box
-Water Course: 1-3/4 inch (44 mm)
-Weight: 222 pounds (101 kg) each
Protective Equipment
-ZAPALERT system with ground stake
-es!lok Exit Side Lockout System
-Emergency shut down switch on operator’s console and tramming control box
Controls
-Climate Controlled Operator’s Cabin
-Microprocessor Operating Control System
-Remote Tramming Control
Fluid Capacities
-Engine Oil
18.5 quarts (17.5 liters)
SAE 15W-40-CD AA Spec Number 401
-Fuel Tank - Diesel
67 U.S. Gallons (254 liters)
Cetane of 50 or higher
-Gearbox Rotary (American Augers manufactured)
10 quarts (9.46 liters or 9460 CD)
80W-140 AA Spec Number 102
Gearbox Rotary
145 oz. (4.3 liters or 4300 CD)
80W-140 AA Spec Number 102
-Gearbox, Carriage
41 oz. (1.2 liters or 1200 CD)
80W-140 AA Spec Number 102
-Gearbox, Track Drive
67 oz. (2.0 liters or 2000 CD)
SAE-30-CD AA Spec Number 403
-Hydraulic Tank
107 U.S. Gallons (405 liters)
ISO 46 AA Spec Number 202
-Mud Pump
12 quarts (11.36 liters)
ISO 100 AA Spec Number 103
-Radiator
Tier 3 engine: 28 quarts (26.5 liters)
Tier 4i engine: 45 quarts (42.6 liters)
50/50 Ethylene Glycol AA Spec Number 602
Other Information:
Antifreeze: AA Spec Number 602
Grease Points: AA Spec Number 301
Mud Swivel Grease: AA Spec Number 301
Watercourse Antifreeze: AA Spec Number 603
-------------------------------------
**2015 MODEL SPECIFICATIONS**
Power Train (requires 2 power packs for optimal performance)
-Engine Cummins QS5B6.7 Tier 4 final (or Tier 3 depending on country of purchase)
-Rating 260 hp (164 kW) @ 2200 RPM
-Fuel Capacity 81 U.S. gallons (306 L)
-Hydraulic Capacity 107 U.S. gallons (405 L)
-Battery (2) Deka 908DME, 12V, 1450 CCA-24 V System
Carriage System
-Rack & Pinion (4) Pinion drive with adjustable force limiter
-Max. Thrust/Pullback 110,000 lbs. (50 tonnes)
-Max. Carriage Speed 170 ft. (52 m) / minute
-Carriage Motor (4) Radial piston / dual displacement
-Carriage Brakes (2) Spring applied / hydraulic release
-Gearbox (4) Planetary gearboxes
Rotary Drive
(1) Pinion and gear drive with infinitely variable torque
-Max. Rotary Torque 15,000 ft. lbs. (20,337 Nm)
-Max. Rotary Speed 150 rpm
-Rotary Motor (1) Radial piston variable displacement
-Rotary Brakes (1) Spring applied / hydraulic release
-Rotary Gearbox (1) Planetary drive
-Fluid Course 2 in. (50 mm)
-Max. Flow 250 U.S. gallons (945 L) / minutes
-Max. Pressure 1,500 psi (103 bar)
-Side-Entry Sub 2 7⁄8 in. (73 mm) IF
-Slip Spindle 2 7⁄8 in. (73 mm) IF
-Misc. Wireline commutator, slip ring, Wiggle Steer, adjustable torque limiter, digital tachometer
Weights & Dimensions - DRILL
-Length 35 ft. 7 in. (10.84 m)
-Height 9 ft. 10 in. (3 m)
-Track Width 8 ft. 2 in. (2.5 m)
-Width 8 ft. 2 in. (2.5 m
Drill Rig Weight
-Accessory Crate 1,300 lb. (590 kg)
-Transport 42,000 lb. (19,051 kg), no pipe baskets
-Working (1) Pipe basket (9) pieces of drill pipe & (3) pieces of drill pipe from staging area: 47,000 lbs. (21,319 kg)
-Drill Pipe Weight 358 lbs. (162.4 kg) each
Wrench (Open-Top Style)
-Max. Breakout Torque 32,000 ft. lbs. (43,390 Nm)
-Max. Makeup Torque 26,000 ft. lbs. (35,250 Nm)
-Clamp/Grip Range 2-7/8 in. - 4-1/8 in. (73-105 mm)
Drill Rig & Pipe
-Drill Angle 10-18°
-Drill Pipe 20 ft. (6 m) or 15 ft. (4.5 m)
-Cabin on-board, articulated
-Max. Pipe Basket Capacity (9) Pieces of drill pipe
-Max. On-Board Baskets WORKING: 2
-Max. On-Board Baskets TRANSPORT: 1
-(3) Pieces drill pipe in on-board staging area
Miscellaneous
-Outside Tube Diam. 3-1/2 in. (89 mm)
-Tool Joint Outside Diam. 4-1/8 in. (105 mm)
-Thread Type - 2-7/8 in. (73 mm) IF pin x box
-Fluid Course - 1-3/4 in. (44.5 mm)
-Pump - Triplex piston pump
-Max. Flow 200 U.S. gallons (757 L) / minute
-Max. Pressure 1,100 psi (75.8 bar)
Travel System
-Self-propelled, Wireless control
-Travel Speed 2.25 mph (3.62 kph) forward & reverse
-Ground Bearing Pressure 12 psi (.83 bar)
Operational Features
-Work Lights (5) 24 volt
-Engine shutdown switch at operator’s console
-es!Lok Exit side lockout system
-ZAPALERT Electrical detection device
Machine Dimensions / Weight
-Length: 30 feet (9.29 m)
-Width: 8 feet (2.43 m)
-Transport Height: 9 feet 6 inches (2.89 m)
-Working Height: 11 feet 4 inches (3.45 m)
-Ground Clearance: 12 inches
-Transport Weight: 41024 pounds (18608 kg)
-Operating Weight: 44246 pounds (20069 kg)
Power Train
-Engine: Cummins QSB 6.7 Diesel
-Rating: 260 hp (164 kW) @ 2200 RPM
-Fuel Capacity: 67 U.S. Gallons (254 liters)
-Hydraulic Capacity 107 U.S. Gallons (405 liters)
-Battery: 2 Deka 908 DMF 12V 1450 CCA, in series to make 24V
Drilling Unit
-Travel System: Self-propelled on Track Crawler Assembly
-Maximum Flat Surface Speed: 2.25 mph (3.62 km/h)
-Drill Angle: Fixed at 15°/27% Grade
-Wrench/Clamp: Open top floating vice grip type
-Weight, Drill Unit: 44246 pounds (20069 kg) with 21 pieces of pipe
-Hold Down System: I-beam stakes manually driven (by excavator); Rear thrust stabilizers resist rearward movement of drill when thrusting
Rotary Drive
-Rotary System: (2) Pinion and gear drive. Infinitely variable.
-Maximum Rotary Torque: 14000 ft-lbs (18981 N-m)
-Maximum Rotary Speed: 150 RPM
Carriage Drive
-Carriage System Rack and pinion, (6) pinion drive with adjustable force limiter
-Maximum Thrust/Pullback: 100000 pounds (45.4 tonnes)
-Maximum Carriage Speed: 100 feet (32.3 m)/minute
Mud Pump
-Onboard Mud Pump: Triplex piston pump with non-electric liner wash
-Output: 200 U.S. Gallons (113.6 liters)/minute @ 1100 psi (75.9 Bar)
-Fluid Course: 2 inches (50 mm)
-Maximum Flow: Up to 250 U.S. Gallons (945 liters)/minute flow
Pipe Loader
-Automated Rod Loader: Uses 20 foot (6.10 m) drill stem. Total pipe capacity on drill is 360 feet (109.7 m); 9 pieces/basket; 2 baskets/machine
Drill Pipe (DD-110)
-Length (each section): 20 feet (6.10 m)
-Outside Tube Diameter:: 3-1/2 inch (89.0 mm)
-Tool Joint Outside Diameter: 4-1/8 inch (105 mm)
-Thread Type: 2-7/8 inch IF Pin x Box
-Water Course: 1-1/2 inch (38.1 mm)
-Weight: 358 pounds (162.39 kg) each
Drill Pipe (DD-110S)
-Length (each section): 15 feet (4.57 m)
-Outside Tube Diameter: 3-1/2 inch (89 mm)
-Tool Joint Outside Diameter: 4-1/8 inch (105 mm)
-Thread Type: 2-7/8 inch IF Pin x Box
-Water Course: 1-3/4 inch (44 mm)
-Weight: 222 pounds (101 kg) each
Protective Equipment
-ZAPALERT system with ground stake
-es!lok Exit Side Lockout System
-Emergency shut down switch on operator’s console and tramming control box
Controls
-Climate Controlled Operator’s Cabin
-Microprocessor Operating Control System
-Remote Tramming Control
Fluid Capacities
-Engine Oil
18.5 quarts (17.5 liters)
SAE 15W-40-CD AA Spec Number 401
-Fuel Tank - Diesel
67 U.S. Gallons (254 liters)
Cetane of 50 or higher
-Gearbox Rotary (American Augers manufactured)
10 quarts (9.46 liters or 9460 CD)
80W-140 AA Spec Number 102
Gearbox Rotary
145 oz. (4.3 liters or 4300 CD)
80W-140 AA Spec Number 102
-Gearbox, Carriage
41 oz. (1.2 liters or 1200 CD)
80W-140 AA Spec Number 102
-Gearbox, Track Drive
67 oz. (2.0 liters or 2000 CD)
SAE-30-CD AA Spec Number 403
-Hydraulic Tank
107 U.S. Gallons (405 liters)
ISO 46 AA Spec Number 202
-Mud Pump
12 quarts (11.36 liters)
ISO 100 AA Spec Number 103
-Radiator
Tier 3 engine: 28 quarts (26.5 liters)
Tier 4i engine: 45 quarts (42.6 liters)
50/50 Ethylene Glycol AA Spec Number 602
Other Information:
Antifreeze: AA Spec Number 602
Grease Points: AA Spec Number 301
Mud Swivel Grease: AA Spec Number 301
Watercourse Antifreeze: AA Spec Number 603
-------------------------------------
**2015 MODEL SPECIFICATIONS**
Power Train (requires 2 power packs for optimal performance)
-Engine Cummins QS5B6.7 Tier 4 final (or Tier 3 depending on country of purchase)
-Rating 260 hp (164 kW) @ 2200 RPM
-Fuel Capacity 81 U.S. gallons (306 L)
-Hydraulic Capacity 107 U.S. gallons (405 L)
-Battery (2) Deka 908DME, 12V, 1450 CCA-24 V System
Carriage System
-Rack & Pinion (4) Pinion drive with adjustable force limiter
-Max. Thrust/Pullback 110,000 lbs. (50 tonnes)
-Max. Carriage Speed 170 ft. (52 m) / minute
-Carriage Motor (4) Radial piston / dual displacement
-Carriage Brakes (2) Spring applied / hydraulic release
-Gearbox (4) Planetary gearboxes
Rotary Drive
(1) Pinion and gear drive with infinitely variable torque
-Max. Rotary Torque 15,000 ft. lbs. (20,337 Nm)
-Max. Rotary Speed 150 rpm
-Rotary Motor (1) Radial piston variable displacement
-Rotary Brakes (1) Spring applied / hydraulic release
-Rotary Gearbox (1) Planetary drive
-Fluid Course 2 in. (50 mm)
-Max. Flow 250 U.S. gallons (945 L) / minutes
-Max. Pressure 1,500 psi (103 bar)
-Side-Entry Sub 2 7⁄8 in. (73 mm) IF
-Slip Spindle 2 7⁄8 in. (73 mm) IF
-Misc. Wireline commutator, slip ring, Wiggle Steer, adjustable torque limiter, digital tachometer
Weights & Dimensions - DRILL
-Length 35 ft. 7 in. (10.84 m)
-Height 9 ft. 10 in. (3 m)
-Track Width 8 ft. 2 in. (2.5 m)
-Width 8 ft. 2 in. (2.5 m
Drill Rig Weight
-Accessory Crate 1,300 lb. (590 kg)
-Transport 42,000 lb. (19,051 kg), no pipe baskets
-Working (1) Pipe basket (9) pieces of drill pipe & (3) pieces of drill pipe from staging area: 47,000 lbs. (21,319 kg)
-Drill Pipe Weight 358 lbs. (162.4 kg) each
Wrench (Open-Top Style)
-Max. Breakout Torque 32,000 ft. lbs. (43,390 Nm)
-Max. Makeup Torque 26,000 ft. lbs. (35,250 Nm)
-Clamp/Grip Range 2-7/8 in. - 4-1/8 in. (73-105 mm)
Drill Rig & Pipe
-Drill Angle 10-18°
-Drill Pipe 20 ft. (6 m) or 15 ft. (4.5 m)
-Cabin on-board, articulated
-Max. Pipe Basket Capacity (9) Pieces of drill pipe
-Max. On-Board Baskets WORKING: 2
-Max. On-Board Baskets TRANSPORT: 1
-(3) Pieces drill pipe in on-board staging area
Miscellaneous
-Outside Tube Diam. 3-1/2 in. (89 mm)
-Tool Joint Outside Diam. 4-1/8 in. (105 mm)
-Thread Type - 2-7/8 in. (73 mm) IF pin x box
-Fluid Course - 1-3/4 in. (44.5 mm)
-Pump - Triplex piston pump
-Max. Flow 200 U.S. gallons (757 L) / minute
-Max. Pressure 1,100 psi (75.8 bar)
Travel System
-Self-propelled, Wireless control
-Travel Speed 2.25 mph (3.62 kph) forward & reverse
-Ground Bearing Pressure 12 psi (.83 bar)
Operational Features
-Work Lights (5) 24 volt
-Engine shutdown switch at operator’s console
-es!Lok Exit side lockout system
-ZAPALERT Electrical detection device
Deze informatie wordt alleen ter informatie verstrekt. HDD Broker LLC kan niet instaan voor de nauwkeurigheid of volledigheid van deze informatie. Deze informatie kan door de fabrikant worden gewijzigd. Sommige specificaties kunnen per modeljaar verschillen.