Equipment Specifications Library
Basic Model Information
-
Manufacturer:Ditch Witch
-
Model:RT115
View Manufacturers View Models Back to Listing
Specifications
Additional Info
DIMENSIONAL
Angle of approach: 25°
Height: 111 in
Nose to rear mount length: 128 in
Length-transport: 148 in
Wheelbase: 73 in
Width: 82 in
Tread: 64 in
OPERATION
Forward Speeds
Low/Low: 0.6 mph
Low/High: 1.3 mph
High/Low: 4.4 mph
High/High: 9.4 mph
Reverse Speeds
Low/Low: 0.3 mph
Low/High: 0.7 mph
High/Low: 2.9mph
High/High: 6.2 mph
Vehicle clearance circle
(SAE) wall to wall with backfill blade
Front steer only: 31 ft
Front and rear steer: 21 ft
Basic unit weight: 7,980 lb
Ground clearance: 14 in
BACKFILL BLADE
Blade width: 80 in
Blade height: 17 in
Lift height above ground: 21 in
Blade drop below ground: 11 in
Maximum swing angle (left/right): 30°
Tilt angle (up/down): 24°
POWER PLANT
Model: John Deere 4045TF275
Fuel: Diesel
Injection: Direct
Aspiration: Turbocharged
Cooling medium: Liquid
Cylinders: 4
Displacement: 276 cubic inches
Bore: 4.2 in
Stroke: 5 in
Engine manufacturers gross power rating @ 2500 rpm: 115 hp
Maximum governed, no-load speed: 2500 rpm
Estimated net power: 103 hp
POWER TRAIN
Ground drive transmission: hydrostatic
Attachment drive transmission: hydrostatic, lever-operated speed infinitely
variable from zero to maximum
Differentials: planetary front and rear with optional rear steering
Service brake: Disc, foot operated
Parking brake: Disc, hand operated
Tires/Pressure: 72 psi
HYDRAULIC SYSTEM @ 2,500 RPM
Pump capacity: 30.4 gpm
Pump relief pressure: 5,000 psi
Attachment Pump
Capacity: 50 gpm
Relief pressure: 6,090 psi
Attachment Pump
Capacity: 13 gpm
Relief pressure: 2,500 psi
FLUID CAPACITIES
Fuel Tank: 38 gal
Engine Oil: 16 qt
Hydraulic reservoir: 24 gal
Hydraulic system: 29 gal
Cooling system: 25 qt
BATTERY
Reserve Capacity: 165 minutes
SAE Cold Crank @ 0° F (-18° C) 875 amp
Auxilliary power outlet - 12 volt,10 amp
Angle of approach: 25°
Height: 111 in
Nose to rear mount length: 128 in
Length-transport: 148 in
Wheelbase: 73 in
Width: 82 in
Tread: 64 in
OPERATION
Forward Speeds
Low/Low: 0.6 mph
Low/High: 1.3 mph
High/Low: 4.4 mph
High/High: 9.4 mph
Reverse Speeds
Low/Low: 0.3 mph
Low/High: 0.7 mph
High/Low: 2.9mph
High/High: 6.2 mph
Vehicle clearance circle
(SAE) wall to wall with backfill blade
Front steer only: 31 ft
Front and rear steer: 21 ft
Basic unit weight: 7,980 lb
Ground clearance: 14 in
BACKFILL BLADE
Blade width: 80 in
Blade height: 17 in
Lift height above ground: 21 in
Blade drop below ground: 11 in
Maximum swing angle (left/right): 30°
Tilt angle (up/down): 24°
POWER PLANT
Model: John Deere 4045TF275
Fuel: Diesel
Injection: Direct
Aspiration: Turbocharged
Cooling medium: Liquid
Cylinders: 4
Displacement: 276 cubic inches
Bore: 4.2 in
Stroke: 5 in
Engine manufacturers gross power rating @ 2500 rpm: 115 hp
Maximum governed, no-load speed: 2500 rpm
Estimated net power: 103 hp
POWER TRAIN
Ground drive transmission: hydrostatic
Attachment drive transmission: hydrostatic, lever-operated speed infinitely
variable from zero to maximum
Differentials: planetary front and rear with optional rear steering
Service brake: Disc, foot operated
Parking brake: Disc, hand operated
Tires/Pressure: 72 psi
HYDRAULIC SYSTEM @ 2,500 RPM
Pump capacity: 30.4 gpm
Pump relief pressure: 5,000 psi
Attachment Pump
Capacity: 50 gpm
Relief pressure: 6,090 psi
Attachment Pump
Capacity: 13 gpm
Relief pressure: 2,500 psi
FLUID CAPACITIES
Fuel Tank: 38 gal
Engine Oil: 16 qt
Hydraulic reservoir: 24 gal
Hydraulic system: 29 gal
Cooling system: 25 qt
BATTERY
Reserve Capacity: 165 minutes
SAE Cold Crank @ 0° F (-18° C) 875 amp
Auxilliary power outlet - 12 volt,10 amp
This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.